Flask

Brand Name:Sinuo

Model Number:SN11010

Place of Origin:China

IEC 62196 11000N Vehicle Connectors and Plugs Drive Over Testing Equipment System introduction: The test equipment is used to check whether a plug or vehicle connector shall have adequate resistance to damage from being driven over by a vehicle, unless it ...

Brand Name:Sinuo

Model Number:SNQC1008

Place of Origin:China

Accessories Mechanical Strength Impact Test Apparatus For EV Testing IEC 60309-1 Product Introduction For Accessories Mechanical Strength Impact Test Apparatus: The test equipment is designed and manufactured according to IEC60309-1: 2012 clause 24.2 and ...

Brand Name:Sinuo

Model Number:SNQC1008A

Place of Origin:China

IEC 60068-2-75 Mechanical Strength Test Pendulum Impact Test Apparatus For EV Charging Piles​ Product Information: Comply with standard EN IEC 61851-1-2019, 12.11 /IEC 61851-1-2017 clause 12.11, IEC60068-2-75:1997, IEC62262:2002, etc. For the mechanical ...

Brand Name:Sinuo

Model Number:SN771

Place of Origin:China

UL94 Horizontal Vertical Flame Chamber with power 50W 500W Flammability Test Equipment Product Information: Standard: IEC60695-11-10, IEC60695-11-20, UL94, IEC60695-11-2, IEC60695-11-3, IEC60695-11-4. Application:It is required by IEC 62368-1:2018 Annex...

Brand Name:Sinuo

Model Number:SN8815

Place of Origin:China

Oil Immersion Test Chamber IEC 62368-1 For Rubber & Enameled Wire Testing Oil Resistance Tester Product Overview: This Oil Immersion Test Chamber is designed for evaluating the oil resistance of rubber and plastic insulators or enameled wires, as required...

Brand Name:Sinuo

Model Number:SNQC1010

Place of Origin:China

EV Plug & Connector Drive-Over Test Equipment IEC 62196-1 EV Charger Durability Testing Overview: The Vehicle Drive-Over Testing Apparatus is specifically designed to assess the resistance of EV plugs and connectors against accidental vehicle crushing...

Brand Name:Sinuo

Model Number:SNQC1010

Place of Origin:China

IEC 62196-1 EV Plug Drive-Over Crushing Test Equipment The EV Plug Drive-Over Test Equipment is designed to evaluate the mechanical durability and safety of electric vehicle connectors and plugs under vehicle crushing conditions. This system simulates real...

Brand Name:Sinuo

Model Number:SN882

Place of Origin:China

UV Weathering Test Chamber Ultraviolet Light Accelerated Aging Environmental Test Chamber Standards & Clauses: ASTMG53-77, GB, GJB, MIL, ASTM, CNS, IEC, JIS, AATCC, DIN, Fed Test, BS, SAE and etc. Samples and Restrictions: Coating, ink, paint, resin, ...

Brand Name:Sinuo

Model Number:SN881-225L

Place of Origin:China

IEC 60068 225L Programmable Temperature and Humidity Climatic Chamber Equipment Overview: This temperature and humidity chamber is required by various of standards, such as IEC60335-1 clause 15, IEC60598-1 clause 4.9, etc. This test chamber is used for ...

Brand Name:Sinuo

Model Number:SN2501

Place of Origin:China

IEC 60898-1 Clause 9.10 Comprehensive Test Equipment for Circuit Breaker Tripping Characteristics Product information: The test equipment is designed and manufactured according to the standard requirements of IEC60898-1 clause 9.10, IEC60947-1 clause 7.2...

Brand Name:Sinuo

Model Number:SN2501

Place of Origin:China

IEC 60947-1 Circuit Breaker Tripping Characteristics Comprehensive Testing Machine Product Information For Circuit Breaker Tripping Characteristics Comprehensive Testing Machine: The test equipment is designed and manufactured according to the standard ...

Brand Name:Sinuo

Model Number:SN444

Place of Origin:China

Intelligent Water Supply & Control Cabinet IPX3/4 Oscillating Tubes Test Equipment IEC 60529-2013 Product Information For IPX3/4 Oscillating Tube Testing Equipment: IPX3~4 oscillating tubes test system is designed and manufactured according to IEC60529:...

Brand Name:Sinuo

Model Number:SN9928

Place of Origin:China

Thermostat Life Test Bench Device For Lamp Temperature Measure With PLC IEC 60598-1 Applied Standards: The tester is designed and manufactured according to the standard requirements of Conform to IEC 60598-1 clause 12.7.2. Features: Thermostat life testing...

Brand Name:Sinuo

Model Number:SN881-408L

Place of Origin:China

IEC 60068-2-78 Intelligent Control System Temperature And Humidity Chamber -40 ℃～+180℃ Product overview: This test chamber is used for cold, heat, humidity and dryness testing of raw materials and devices such as electronics, electricians, electrical ...

Brand Name:Sinuo

Model Number:SN2121

Place of Origin:China

IEC 60884-1 Clause 23.4 Power Cord Flexing Test Equipment For Plugs And Sockets Testing Product Information: The power cord flexing test apparatus meets the requirements of IEC 60884-1:2022 figure 21 clause 23.4, which is used to process the flexing test...

Brand Name:Sinuo

Model Number:SN441-2000L

Place of Origin:China

IEC 60529 Fig 2 IP5X And IP6X Sand And Dust Test Chamber 2000L PLC Control Product information: The test device is suitable for sealing parts and enclosure’s sand and dust resistance capacity testing of the electrical and electronic products, car and ...

Brand Name:Sinuo

Model Number:SN991

Place of Origin:China

IEC 62560 Clause 6 Interchangeability Gauges For E14 And E27 Lamp Cap 7006-28A-1 Product Overview: Our Lamp Cap Gauges are meticulously designed to meet the dimensional and safety requirements outlined in IEC 60061-3, supporting compliance with IEC 60598...

Brand Name:Sinuo

Model Number:SN2112

Place of Origin:China

IEC 60884-1 Figure 12 Screwless Terminals Deflection and Voltage Drop Test Device Standard: IEC60884-1 clause 12.3.12, Figure 12. Application: It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains ...

Brand Name:Sinuo

Model Number:SN332-10

Place of Origin:China

ISO 15502 Refrigerator Freezer Energy Efficiency Performance Test Chamber Overview: This refrigerator performance lab is designed and manufactured as one testing chamber. The Freezing Capacity, Energy consumption and other performances of refrigerator are ...

Brand Name:Sinuo

Model Number:SN1104

Place of Origin:China

IEC60950 1.2/50 μS Impulse Voltages Generator 2 Internal Resistances Product information: This impulse voltage test generator is required by IEC60335-1:2004, IEC60950-1:2005,IEC60065:2005,GB4706.1and etc. The equipment is used to verify transient ...