JUYI 48V BLDC Motor Controller JYQD-YL01D with fast reverse brake function

JUYI 48V BLDC Motor Controller JYQD-YL01D with fast reverse brake function

Application notes:

1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.

2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly.The hall angle should be 120 degrees.

3. The brake function of JYQD-YL01D is reactive brake.The motor turns the brake to produce energy for recycling.Please don’t use the brake function when testing with a regulated power to avoid damage driver.

4.The 5V output port on the driver board,can be controled by the single-chip cumputer with the current lower than 100MA.

5.Pleasse pay attention to the insulation and heat dissipation about the driver board.

6.Safety start function:If the speed regulation is not in right place or the speed rehulation is invalid after power-on, please make the speed regulation or brake reset can be ok.

Driver Board diagram

Wiring Diagram

1. Control port (right) 2.54 hole spacing

5V-control board internal output 5V.

EL - brake control port, reactive linear brake, with energy recovery function, analog voltage brake 0-5V. In the case of constant speed +, the higher the brake voltage, the greater the braking force 0-100%.

M-Speed signal output port, pulse frequency is proportional to motor speed (pulse ratio is related to motor)

Z / F-Positive and reverse control port. Hard change, 5V or suspended to one direction,GND to the other direction.

VR - speed control port, analog voltage speed regulation 0V-5V(0-2.5V) speed regulation, linear speed regulation from low to high. External PWM speed regulation needs to be shared with the drive board.

GND - control board.

2. Power port (left) 3.96 hole spacing

P + - Power input cathode 12V-48V (support lithium)

P- - Power supply input negative electrode

MC / W - - One of the motor phase line

MB / V - - One of the motor phase line

MA / U - - One of the motor phase line

GND - - Motor Hall negative electrode

HA- - motor Hall signal one

HB - - motor Hall signal one

HC - - Motor Hall signal is one

5V - - Motor Hall positive pole

3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.

4. Pay attention to the heat dissipation if continue working with the max. Current.

Dimensional Drawing

Shanghai Juyi Electronic Technology Development Co., Ltd established in 2010, Its a high-tech enterprise specializing in research, development, production and sales of brushless motor controller products. Its headquarters and research and development base are established in international economy, finance, trade, shipping, and technology innovation Center - Shanghai.

The company has strong technical and R&D strength. It is a  participant in many military projects and has in-depth cooperation with many domestic large-scale enterprises and government departments.

From its inception, JUYI Tech has always adhered to the principle of environmental protection and energy conservation, and established the business principles of honesty and integrity, bringing together elites in the industry, combining advanced electronic technology, management methods and corporate experience at home and abroad with the actual conditions of domestic companies to provide comprehensive services for enterprises.

The solution will help companies acquire more advanced product technologies and production capabilities, so that enterprises will remain competitive in the fierce market competition and achieve rapid and steady development of the company.

The company has a reasonable structure of talents, has many technical backbones, and has more than one master's degree, bachelor's highmiddle level technical titles. In order to develop intelligent and energy-saving electromechanical automation products that are truly suitable for business needs, the company has entered into cooperation with a foreign control chip manufacturer to customize the unique DC brushless control IC of JY series to provide customers with more flexibility, intelligence and stability. A more cost-effective brushless motor control solution.
 

With the best products, best service and best reputation, JUYI Tech products has been applied in the automobile,textile, packaging, printing, laser, food, woodworking, clothing, plastics, agricultural machinery, gardens, medical, experimental, robotics, military and other mechanical equipments. and achieved brilliant results, completed the supporting services of many large-scale enterprises, and are willing to become your most reliable long-term partner in future!

Contact us: