7 Segment 12864 Dot Matrix LCD Display with 6 O'clock Viewing Direction and ST7567s IC

7 Segment COG 12864 Dot Matrix Lcd Screen Monochrome FSTN Display

Product Details

I. Product Core Technical Characteristics and Parameters

1. Basic Display Specifications
Dual display modes: Integrated 7-segment digital tube display (suitable for pure digital information display) and 128-column × 64-row dot matrix graphic display (can present text, simple graphics, symbols), capable of simultaneously displaying numerical parameters and text descriptions, such as presenting the combined information of "25℃ Room Temperature" on the instrument.
FSTN LCD technology: Utilizes Film Super Twisted Nematic (film super twisted nematic) liquid crystal mode, compared to traditional STN screens, the viewing angle is increased to 120° (horizontal) / 90° (vertical), contrast ratio ≥ 300:1, the displayed content is clearer at different angles, and the response speed is faster (≤ 100ms).
Single-color display effect: Mainly black and white, there are also color options such as blue background white text, green background black text, yellow background black text, etc., some models support semi-transmissive and semi-reflective mode, without backlight, it can display through environmental light reflection, suitable for outdoor usage scenarios.

2. COG Packaging Advantages
Miniaturization Design: The driving IC is directly bonded to the glass substrate, the module thickness can be controlled within 2.8-6.5mm, the common external dimensions are 53.2mm × 37.8mm to 71.4mm × 44.7mm, compared with COB packaging, the volume is reduced by more than 30%, suitable for ultra-thin device design.
High Reliability: Reduces welding points and connection lines, reduces signal transmission loss and failure probability, electrostatic discharge resistance can reach ESD 8KV, meets the electromagnetic interference requirements of industrial environments.

3. Electrical and Interface Parameters
Driver and Interface: Equipped with ST7565/ST7567 driver chips, supporting SPI serial interface or 8-bit parallel interface, the SPI interface only requires 4 control lines, simplifying the motherboard circuit design; the parallel interface has a faster transmission speed, suitable for dynamic display requirements.
Power Consumption and Voltage: Working voltage is 3.3V, working state power consumption ≤ 100mW, sleep current ≤ 1μA; built-in LED backlight (side-emitting type), brightness ≥ 100cd/m², backlight life ≥ 50,000 hours.
Environmental Adaptability: Working temperature range - 20℃~70℃, some industrial-grade models can reach - 30℃~80℃, storage temperature - 30℃~80℃, meeting the requirements of wide temperature use.

II. Typical Application Scenarios

1. Industrial Instruments and Meters
Applicable Devices: Multimeters, Infrared Thermometers, Pressure Gauges, Frequency Counters, etc.
Requirement Matching: 7-segment display can precisely show measurement values (such as "220V", "50Hz"), 12864 dot matrix can display auxiliary information such as units, ranges, and fault codes; FSTN wide viewing angle facilitates operators to read data from different angles, COG packaging's high stability meets the requirement of 24-hour continuous operation.

2. Consumer Electronic Devices
Applicable Devices: Electronic Scales, Coffee Machines, Microwave Ovens, Bluetooth Speakers, Electronic Dictionaries.
Requirement Matching: 7-segment display is used to display core data (such as weight "65.5kg", time "12:00"), dot matrix screen can display device status (such as "Bluetooth connected"), operation instructions; Low power consumption extends the battery-powered device's battery life, miniaturized design is suitable for the compact control panels of household appliances.

3. Medical and Health Devices
Applicable Devices: Blood Pressure Monitors, Blood Glucose Monitors, Oxygen Saturation Monitors, etc.
Requirement Matching: 7-segment display presents key values such as blood pressure, blood glucose, etc., dot matrix screen displays measurement result interpretations (such as "Blood Pressure Normal"), operation steps; Wide temperature characteristics adapt to different usage environments, semi-translucent and semi-reflective mode is convenient for the elderly to read data in natural light.

4. Automotive and Internet of Things Devices
Applicable Devices: Vehicle Tire Pressure Monitoring Systems, Driving Recorders, Internet Gateways, Smart Home Control Panels.
Requirement Matching: 7-segment display shows digital parameters such as tire pressure, vehicle speed, etc., dot matrix screen displays alarm information (such as "Left Front Tire Pressure Low"), device connection status; COG packaging's shock resistance and anti-electromagnetic interference capability, suitable for the complex environment during vehicle travel.

Our Services:

1. Free repair within one year after the shipment of products from us.

2. Replacement within 30 days after the shipment of products from us due to products' problems.
3. We can print your logo and stick your model No.on the cameras.
4. We have long cooperation with many shipping companies and our export volume is large. The shipping companies

can offer us good discounts.
5. Professional technician supports. We have a good after-sales service team. They can solve your problems in time.
6.All goods will be inspected and tested by our engineers and QC/QA before packing and shipment.
7.Customers satisfactory is most important to us.If you have any problem or questions regarding our transaction.Please contact us by Email or online. It will be responded within 24 hours.

8.Products pictures only for your reference. please kindly refer to the specification. we can provide the products basic on the specification. or you can offer your own specification or drawing , we can customize all kinds of LCD displays for you. thanks for your kind support always.

FAQ:

1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

Answer: No problem. Firstly, please kindly send us your specification/ drawing paper

If you have not the specification, you can also provide your samples; we will recommend the suitable one

if it is standard products. Or we can customize for you based on your own requirement.

2.This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content,

a new LCD glass module is need. We have to open new tooling for you.

3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.

4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.

7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for

special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.

DONG GUAN BIBUKE  Electronics Technology  Co., Ltd. 

It set up in the year of 2002, is a high-tech enterprise specialized in producing LCD and LCM. Our company has 1500 staffs and more than 30000 square kilometer area, advanced LCD production lines, and a professional team with great strength and rich experience. we can customize all kinds of sizes liquid crystal display (LCD) with glass thickness 1.1mm, 0.7mm,0.55mm,0.4mm and the models of TN, HTN, STN and FSTN LCM with COB, TAB, COG, TFT , LED Backlight.

 In this competitive industry, BIBUKE is known for providing high-quality products. Welcome new and old customers to contact us, we sincerely hope to cooperate with partners, create a better future, achieve win-win!  

Products Application field:

Automobiles  Sports Equipment   Watches   Household appliance(air condition/wash machine/electronic cooler/ refrigerator/disinfection cabinet/ wash bowl machine/ calculator /electronic scale etc.)

1. Our standard TFT LCD Display size, and experienced team for Your Custom Solution:

1.44", 1.54", 1.77", 2", 2.2", 2.4", 2.7", 2.8′′, 3.0", 3.2", 3.5", 4", 4.3", 4.5", 5", 5.5", 5.6", 5.7", 7", 8", 9", 10.1", 10.4"

2. Our standard IPS LCD Display size, and experienced team for Your Custom Solution:

1.54", 2.4", 2.8′′, 3.0", 3.5", 4", 4.3", 4.5", 5", 5.5", 7", 8", 9", 10.1", 10.4"

3. Standard touch screen LCD display for all kinds of TFT and IPS LCD display with Resistive and Capacitive touch panel, and can make customized touch screen optical bonding with LCD display

4. High Brightness TFT Display with from 800 CD/m² To1000CD/m² With good performance under sunlight readable (outdoor LCD display).

5. All common TFT Display will O film can be super wide view angle, close to IPS panel & same as MVA glass.

6. Standard TFT and IPS LCD displays option Resistive and Capacitive Touch Panel are applied for Cell phone, Tablet PC, digital and industrial products and so on.

7. Customized and Standard mono Character LCD Module, COB and COG graphic LCD Module with various colors including yellow/green, white, blue, and with various backlight and LCD type combinations.

FAQ:

1.     I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?

If you have not the specification, you can also provide your samples; we will recommend the suitable one

2.This LCD  is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
      Answer: For the segment type LCD module, if you need modify the outline size or display content,

3. This LCD display is HTN type, but I want STN type,can you make?
      Answer: That’s all right .  we can change for you as per you request.

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you.

we can report you the exact time when you confirm the drawing paper.

4. I want customize a new LCD module. Can you do?
      Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size 

of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp.  Supply Voltage, Viewing direction, drive condition), we can customize for you.

5. What is leading time for tooling?
      Answer: General speaking, it will cost 15 to 25 days  after drawing paper confirmation and tooling charge payment,

we can report you the exact time when you confirm the drawing paper.

6. Can you send us samples for checking?
     Answer: Yes,. Samples order is available.

7. What is the Leading Time?
    Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for