M12 M8 Eye Nut Din 582 Stainless Steel Lifting Eye Nuts Ring Nuts Electro Galvanized

M12 M8 Eye Nut Din 582 Stainless Steel Lifting Eye Nuts Ring Nuts Electro Galvanized
Description

DIN582 Lifting Eye Bolt, Steel, Zinc Plated, Die Forged, Female

These lifting eye nuts are strong and robust, and correspond to standard sheet DIN 582 (version 2003-08).

The following guidelines have to be observed in addition to the load values given in the attached PDF table.

The eye nut must be of fully screwed in to achieve a perfect contact between the two mating faces.

Both threads must be of an equal length and the base material of equal strength to that of the nut.

With a side pulling angle of > 45, lifting eye bolts must not be used.

• Warning: The lifting eyes shall be screwed tight against the surface. When two lifting eyes are used their mutual position shall result in the two eyes at the same level. Larger angle between the slings than 90° are not tolerated. Lifting eyes can not be assembled against a surface that differ essentially from a surface perpendicular to the direction of the lift.

• For lifting and transport activities.
• For security areas and high requirement.
• For permanent attachment to transport parts.
• With CE marking und user information.

Specification

Popular size

din 580 582
din 582 a2
din 582 a4
din 582 c15
din 582 c15e
din 582 iso
din 582 m10
din 582 m12
din 582 m16
din 582 m20
din 582 m30
din 582 m36
din 582 m6
din 582 m8
m10 din 582

EUROTECH FASTENERS (WUXI) CO., LTD, has been focusing on the hardware fastener industry for many years, based in the Yangtze River Delta and radiating across the country. Engaged in the research and development, production, sales and service of fastener products. The company is committed to building a passionate and energetic young team to serve on the front line and provide customers with comprehensive solutions.

Founded on innovation, founded on integrity, and founded on quality. The factory has established complete experimental equipment and has passed ISO9001 quality management system certification. The products have passed third-party testing and certification and comply with EU environmental protection requirements. We are produced in strict accordance with national standards (GB), German standards (DIN), American standards (ANSI), international (ISO), Japanese standards (JIS), British standards (BS), etc., and at the same time, we develop and process non-standard products according to customer needs. Customized drawings and samples.

We win customers with high-end quality and fast service. Our products are widely used in solar energy, wind energy, environmental protection equipment and engineering, communication equipment and engineering, power equipment and engineering, curtain wall doors and windows, subway rail transit, ships, pump valves, petrochemical industry, food machinery , dyeing and finishing equipment, LED lighting, outdoor furniture, automobiles and mechanical equipment and other industries.