Glow Wire Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products
|
...Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products Application: The device is designed and manufactured according to the requirements of "glow-wire test method" in IEC60695-2-10: 2000, GB / T5169.10-2006, GB / T5169.13-2006 and GB4706.1 standards. It is suitable for electrician and electronics Fire hazard testing......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
25mm/s Flammability Testing Equipment Fire Hazard Test
|
...Test Chamber Fire Hazard Testing Glow Wire Test Apparatus Standard: IEC60695-2-10 Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods – Glow-wire apparatus and common test procedure, IEC60695-2-11 Fire hazard testing – Part 2-11 : Glowing/hot-wire based test methods – Glow-wire flammability test method for end-products, IEC60695-2-12 Fire hazard testing – Part 2-12: Glowing/hot-wire based test......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Flammability Testing Equipment Horizontal Vertical Flame Tester For Fire Hazard Testing
|
...Testing Equipment Horizontal Vertical Flame Tester for Fire Hazard Testing Standard: UL94 Test for Flammability of Plastic Materials for Parts in Devices and Appliances; IEC 60695-11-2 Fire hazard testing - Part 1 1 -2: Test f1 ames - 1 kW nominal pre-mixed flame - Apparatus , confirmatory test arrangement and guidance; IEC 60695-11-3 Fire hazard testing – Part 11-3: Test flames – 500 W flames – Apparatus and confirmational test...
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60695-11-5 Needle Flame Test Method Fire Hazard Testing Apparatus
|
... E, etc. The Needle Flame Tester consists of a Ф0.9mm needle-shaped burner that tilts with the angel of 45°and provide it with butane gas. The fire hazard of...
Sinuo Testing Equipment Co. , Limited
|
IEC60695-2-20 Hot Wire Ignition Test Apparatus , Fire Hazard Testing Equipment
|
... Wire Ignition Test Apparatus /Fire Hazard Testing Equipment 1. Introduction The hot wire ignition test apparatus is designed according to the standards of IEC60950, IEC60695-2-20, UL60950, ASTMD3874 and etc.. The hot wire ignition test uses a heating wire......
Pego Electronics (Yi Chun) Company Limited
|
Glow Wire Test / Fire Hazard Testing Apparatus Laboratory Equipment
|
...Test/Fire Hazard Testing Apparatus Laboratory Equipment Description: Parts of insulating materials or other solid combustible materials that facilitate flame spread within the equipment may be ignited by glowing wires or glowing elements. Under certain conditions, such as faulty current through wires, element overload, and poor contact, some elements may reach a temperature that ignites nearby parts. Hot wire testing...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Safety Measurement Needle Flame Test Apparatus Standard IEC60695 Fire Hazard Testing Automatic
|
...Test Apparatus Standard IEC60695 Fire Hazard Testing Automatic Instrument The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test......
Suzhou Yangyi Vouch Testing technology Co.,Ltd
|
IEC 60331 Fire Resistance Testing Machine with Shock and Water for Cable Test
|
Fire Resistance Testing Machine with Shock and Water Introduction This cable fire resistance testing machine to be used for testing cables required to maintain circuit integrity when subject to fire alone or fire with shock where the test condition is based upon flame with a controlled heat output corresponding to a temperature of at least 750˚C or fire with shock at a temperature of at least 830 °C. IEC 60331 Test for electric cables under fire...
Advanced Instruments Co.,Limited
|
ISO 12127-2-2007 Fire Retardant Testing Machine Protective Clothing Contact Heat Transimmision Tester
|
... of fire protection clothing, thermal protective gloves, or similar fire protection materials to resist high temperature contact heat. By testing the material when it is in contact with a heating body at a certain temperature under a certain pressure,...
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
CF8342 Building Component Fire Resistance Testing Machine OEM ODM OBM
|
...Fire Resistance Testing Machine Scope of application: Suitable for fire resistance testing of building components and the fire resistance performance of load-bearing vertical partition components. Working voltage: AC 380V ± 10% 50NZ. Furnace body: The experimental furnace passage is composed of bricks, steel structure, and fire......
Dongguan Chengfeng Testing Equipment Co., Ltd
|
Submit your “fire hazard testing machine” inquiry in a minute :