Sign In | Join Free | My webtextiles.com
webtextiles.com
Products
Search by Category
Home > Testing Equipment >

Packages Clamp Force Tester ISTA Packaging Testing Machine With PLC Control

Categories ISTA Packaging Testing
Brand Name: haida
Model Number: HD-A534
Certification: ISO,CE
Place of Origin: China
MOQ: 1set
Price: Negotiable
Payment Terms: L/C,D/A,D/P,T/T,Western Union,MoneyGram,In cash, escrow
Supply Ability: 300 Sets per Month
Delivery Time: 20 days after order confirmed
Packaging Details: each set protected with resin fiber and PP film, then put into Strong wooden case with operation man
Product Name: Packages Clamp Force Tester
Max. Specimen weight: 500kg
Clamping board size: H*D 48*48inch
Elevation speed: 10~300mm/min optional
Company Info.
Hai Da Labtester
Verified Supplier
View Contact Details
Product List
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Packages Clamp Force Tester ISTA Packaging Testing Machine With PLC Control

    Packages Clamp Force Tester ISTA Packaging Testing Machine With PLC Control


    Product Introduction:

    Packages clamping force testing machine is designed to measure the deflections of product packages and protective capacity of packages for product when suffering level pressure in the process of transportation and storage to improve the quality of product package.


    Safety protection

    Overload protection, overvoltage protection & limited position protection device


    The Parameters

    Specimen shapeParallelepiped transport package
    Max. Specimen weight500kg
    Clamping pressure forceAccording to the transport diagram on the test sample, the operator can add 400~3000Lb (adjustable) pressure force on the corresponding surface
    Clamping board sizeH*D 48*48inch
    Clamping board adjustable height0~500mm
    Elevation speed10~300mm/min optional
    Clamping board expansion width200~2000mm
    Baseboard dimensionW*D 1500*1500mm
    Clamping board requirementMake sure the two clamping board are flat, parallel and non-deform under the work condition(2000Pound) and clamp board and land are vertical. Clamping board thickness no less than 25mm.
    Corrector of forceForce value display used to correct clamping force
    Force precisionNational standard 1.6 level
    OperationManual operating rod simulates fork truck actual operating actions such as clamping control, opening, lifting up, lifting down or automatic switching mode operation (clamping board thickness no less than 25mm)
    Device widthLess than 2.5m

    Clamping force1T
    coloroptional
    Resolution1/100,000
    Test Space(L x W x H)100x 100 x 100cm
    Test Speed10±3mm/min
    Weightaround 300kg
    Power1#, 220V/50HZ

    Clamp Compression Testing Method of Large Products

    1.Before placing the packaged product between platens, verify that the clamp force using the clamp indicator. The indicator should be placed between the axes of the platen articulation points approximately 1/2 way up the platens.

    2.Each time the product is clamped, the force should be applied for a minimum of 15 seconds and not to exceed 1 minute.

    3. Apply the clamp force on the sample with the platens resting on the floor and the front edge of the platens flush with the front of the package (see flush platen photo 4). If the package is too large for the clamps to be flush to front edge (i.e., large refrigerator, tractor etc.), clamp as close to the edge as possible.

    4. Clamp the product a total of 10 times in the flush orientation.

    5. Apply the clamp force on the packaged product with the platens in a 6×6 inch(15.2x15.2cm) offset position(see fig 5 ). Both the horizontal and vertical offset dimensions are measured at the front bottom corner of the platen. If the package is too large for the clamp to be positioned 6-inches from the front edge (i.e., large refrigerator, tractor etc.), clamp as close to this position as possible.

    1)Exception number 1: for large products with an obvious, visible external skid(see fig 6), offset clamp testing is not conducted if the product does not extend beyond any part of the skid and there is some form of handling graphic or note that indicates to clamp only from the skid. If there is no graphic or not indicating this or there is some overhang beyond the skid, then the entire clamp test protocol is conducted.

    2) Exception number 2: If the product height, when placed in its normal shipping orientation, is ≤ 12 inches, the 6 x6 inch offset testing is not conducted.

    6. Clamp the product a total of 10 times with the clamp in the 6 x6 inch offset position.

    7. Repeat step 5.2.5 except with a 2 x6 inch offset clamp position. The 2 x6 inch offset is similar to the 6 x6 inch offset except the platens are oriented such that they are 2-inches from the floor and 6-inches back from the package’s front edge. If the package is too large for the clamps to be positioned 2-inches from the front edge (i.e., large refrigerator, tractor etc.), clamp as close to this position as possible.

    8. Repeat flush and offset clamping on all other sides of the product that are indicated in the handling graphics as acceptable for clamp handling.

    According to verdict standards, if there is one item failed the test, then put forward the “Test Failure Handling Sheet


    Packages Clamp Force Tester Images

    Packages Clamp Force Tester

    Buy Packages Clamp Force Tester ISTA Packaging Testing Machine With PLC Control at wholesale prices
    Send your message to this supplier
     
    *From:
    *To: Hai Da Labtester
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0