Categories | Twisting Bunching Machine |
---|---|
Place of Origin: | JIANGSU |
Brand Name: | DAWN |
Certification: | ISO9000 |
Model Number: | 500B |
MOQ: | 1 SET |
Packaging Details: | EXPORT PACKING |
Delivery Time: | 30 DAYS |
Payment Terms: | T/T |
Supply Ability: | 50 SET/MON |
Usage: | Stranding |
Company Info. |
dawn industries |
View Contact Details |
Product List |
650B double twist bunching machine
Mechanical structure performance analysis:
1. Mechanical body structure:
1-1 Material: low carbon steel welding form
1-2 Structure: the mechanical body is treated by annealing , eliminate stress, precision boring machine through a molding process.
2. Inlet part:
2-1 Inlet location: in the face of machine, on your right (may according to customers requirements and correct to left).
2-2 Way of inlet: from pay-off device pass by wire breakage induction district, first through total sub-panels (hole-line distributed as 1+6+12+) through the first isobar die, and through the second isobar die, at last get into wire guiding round of the right spindle. Through Al-arch belt ceramic ring enter wire guiding round of the left spindle , through center corner round to capstan wheel, after passing by the third isobar die to arrange wire (Details for way of thread diagram).
3. Spindle
3-1 Material: #45 steel slag after quenching and tempering.
3-2 Accuracy: cylindrical core shaft and bearing positioning end are all lapped, ensure that the concentricity of axis core and the vertical degrees.
3-3 Balancing: the accuracy of balancing is G2.5 grade (the variance of weight is 0.03 grams ).
4 Aluminum disk
4-1 Material: ZL104
4-2Accuracy: all cylindrical end relative positioning holes beating 0.03.
4-3 Balancing: the accuracy of balancing is G2.5 grade (the variance of weight is 0.03 grams).
5.Arch belt
5-1 Material: imported Taiwan quality 65Mn heat treatment.
5-2 Shape: special appearance and reduce wind resistance.
5-3 The variance of weight: each variance of weight 0.03 grams.
6.Drive part
Drive by synchronization strap, standard lay length is exact, synchronization strap is adopted imported product.
7.Wire guiding wheel
7-1 Material: #45 steel heat treatment HRC30-40.
7-2 Plating hard chromium or spraying ceramic on surface, not been worn.
8. Spindle housings
8-1 Material: ductile iron QT42-10.
8-2 Processing: CNC machine tools
8-3 Accuracy: inner hole end, a molding process to ensure the concentricity.
9. Bearing spindle lubrication system:
9-1Way of lubrication: flying cheap-oil lubrication
9-2 Model of oil: 46 wear-resistant hydraulic oil
9-3 Way of sealing: mechanical retaining oil ring and back oil hole to prevent oil leakage and maintain internal cleaning of machine.
10. Take-up
10-1 Take-up tension control: take-up tension is controlled by magnetic powder clutch . PLC automatic follow-up and regulate tension, the tension is constant.
11.Dimension of take-up spool
Diameter(φD) | Aperture(φd) | Outerwidth(L1) | Innerwidth(L2) | Positioning hole | Center distance |
630 | 80 | 380 | 350 | 26 | 200 |
(The above specifications is factory standard specifications, may design according to customers take-up spool size.)
12. Dynamic power:
One 650B high speed bunching machine 3.5KW
13. Static power:
One 650B high speed bunching machine 7.5KW
This kinds of machine is applied to the double twisting of 2 pcs of
core wire(telephone wire and network cable).
This machine has been solden to India, Uzbekistan, Egypt and America and enjoy good fame.
1. Usage: It is applied to the double twisting of 2 pcs of core wire(telephone wire and network cable). |
2.Diameter of single core: φ0.5~φ3.0mm |
3.Outer diameter of wire: φ1.0~φ6.0mm |
4.Size of take up spool: φ630mm×length360mm×inner coreφ80mm |
5. Maximum rotating speed: 1600RPM (3200 twist/min) |
6.Type of traverse: φ30mm rolling ring traverse,winding pitch and breadth are adjustable. |
7. Standard lay length: 34 section 11.15~100mm (enclose list of standard lay length). |
8. Main motor: 7.5KW AC motor +frequency converter |
9. Weight of copper load: about 3500kg |
10. Direction of strand: optional for right or left |
11. Brake: electromagnetic brake for external break, automatic stop when wire reach setting meter. |
12. Tension control: take up tension is controlled by magnetic powder clutch, PLC follows up and regulates tension ,constant tension. |
13. Drive bearing: it is adopted imported Japan bearing. |
14. Synchronization strap: it is adopted imported American product. |
15. Spool from top to bottom: it is adopted manual pump hydraulic landing. |
16. Way of spindle lubrication: splash machine oil lubrication. |
17. Index of noise: about 80dB |
18.Dimension: (length×breadth×height): 3300×1450×1650 |
19. Weight: 3500Kg |
Intermediate Wire Drawing Machine