Intelligent Digital Gloss Meter NHG268,QC software included
20°/60°/85° 3-Angle Portable Touch Screen Operation Easy to use
The gloss meter is applied especially in areas where it is
important that the surfaces have the same structure, and thus have
the same surface characteristics. This often happens in quality
control. So, the gloss meter is a measuring instrument which can be
used in many different companies.
Included with this gloss meter there is also a disk with special
evaluation software. So the measured data can be first stored on
the device and later transferred to a computer. The software of the
gloss meter also has an analysis function that serves for precise
1. 3 angles (20°, 60° and 85°) in device: from high to low gloss -
have the specified angle on hand
2. One button for all angles measurement at the same location
3. Display 5 sets of measurement data, easy for comparison
4. Measuring mode: basic measurement, statistical measurement,
continuous measurement, QC measurement (only for GQC6 software).
5. Continuous mode to check uniformity over large areas
6. Connect to PC, more extend functions
7. Input gloss value manually
8. 3.5" TFT touch screen, easy to use
9. Beauty appearance, good man-machine communication interface
10. Powerful functions to meet many different requirements
11. Large storage to save over 5000 data
12. Built-in L-ion rechargeable battery.
steel,Aluminum oxidation,Stone,Ceramic tile,Leatherwear...
5 Specifications for Digital Gloss meter NHG268
|Comply with standard ISO 2813, GB/T 9754, ASTM D 523, ASTM D 2457|
|Measuring Area (mm)||20°: 10x10 60°: 9x15 85°: 5x36|
|Measuring Range||20°:0~2000GU 60°:0~1000GU 85°:0~160GU|
|Measurement Range||0-10GU 10-100GU 100-2000GU|
|Repeatability||± 0.1GU ± 0.2GU ± 0.2%GU|
|Reproducibility||± 0.2GU ± 0.5GU ± 0.5%GU|
|Measurement Standard||Conform with JJG696 first class glossmeter working requirement|
|Chromaticity Corresponding||Corresponding with CIE 1931(2°) under CIE C light source|
|Errors||±1.2 , ± 1.2%|
|Dimension||L*W*H : 160mm*75mm*90mm|
|Battery||3200mAh Li-ion Battery ,>10000 times(within 8 hours)|
|Display||TFT 3.5 inch, capacitive touch screen|
|Storage||Basic mode: 1000; Statistical Mode: 5000,Continuous mode : 5000|
|Software||GQC6 Quality Control Software with QC report printing functions and
more extended functions.|
|Humidity||<85% relative humidity, no condensation|
|Standard Accessories||Power Adapter, USB cable, User Manual, CD (Including QC software),
|Optional Accessories||Miniature Printer|
|Note||The specifications are subject to change without notice.|
6 Certification for our Digital Gloss meter NHG268
Packaging & Shipping
Packing Material : Nylon box with carton box
Packing Size 29*19*10CM
Delivery time: Within 1 working day after payment received.
How to choose gloss meter angle ?
How to choose gloss meter angle ? For early contact with the gloss
meter reader is a more confused proposition, it comes out a lot
when searching on the Internet. There is single-angle gloss meter,
three-angle gloss meter, a 45-degree gloss meter, a 60-degree gloss
meter, so which gloss meter is suitable for us to use it?
In general, gloss meter has 20 °, 45 °, 60 °, 75 °and 85
°specifications. Then how to choose gloss meter angles ? If our
customers required us what angle gloss meter to measure the gloss
data then we need choose according to the customer's request.
If the customer didn’t specify what angle, it can choose 60
°general version gloss meter, 20 °angle meter is generally used in
the gloss products higher than 70Gu, 85 °angle is generally used in
gloss products less than 10 °, 45 °And 75 °angles used less, 45
°gloss meter is mainly used for the surface gloss measurement of
plastic film, 75 °gloss meter is mainly used for enamel surface
|Gloss Range||60° Value||Notes|
|High Gloss||>70 GU||If measurement exceeds 70 GU, change test setup to 20°|
|Medium Gloss||10 - 70 GU|
If measurement during 10- 70 GU, change test setup to 60°
|Low Gloss||<10 GU||If measurement is less than 10 GU, change test setup to 85°|
All color spectrophotometer and colorimeters have one year warranty
from the purchase date. If it has something wrong during warranty,
you can send it back to us. The buyer pays for the returning
shipping cost and we will pay for the sending shipping cost.
Shenzhen ThreeNH Technology Co., Ltd
Add: 4/F, Building 8, Nangang Second Industry Zone, Xili, Nanshan
District, Shenzhen, 518055 China.
Tel: 0086-755-2719 8826 Ext: 639
Fax: 0086-755-2719 0609
Cell No.: 0086-135 1084 7362
Wechat: +86-135 1084 7362